Automatic reposition injection gun (patent)(Model MG-96-1 and MG-92-1)
nject the sealant through the material-filling hole. By hydraulic pressure piston drives material-pushing pole to press sealant and spring. When cylinder releases pressure, pressed spring releases power and drives the piston and material-pushing pole back to the original position. With the maximum oil pressure, 63 MPa, the cylinder may allow to inject sealants with and under φ24×90.

Hydraulic reposition injection gun (patent)(Model MG-96-2 and MG-85-1)
Inject the sealant through the material-filling hole. By hydraulic pressure piston drives material-pushing pole to press sealant and come back to the original position. With the maximum oil pressure, 63 MPa, the cylinder may allow to inject sealants with and under φ24×90.

Manual hydraulic pump
Utilized as the main source of power in the sealing process.
SYB-1 (w/ shunt valve): 63 Mpa, 0.7 liter oil storage capacity, 9 kg

SDB-2: 63 Mpa, 0.7 liter oil storage capacity, 9.5 kg

P392 (U.S. ENERPAC): 70 Mpa, 0.9 liter oil storage capacity, 4.1 kg

Electric hydraulic pump
Utilized as the main source of power in the sealing process.DB90.7: 220/380V, 60Mpa

Pneumatic hydraulic pump
PAT-1102N (U.S. ENERPAC): 2 liter oil storage capacity, 6.4 kg

Fast installing connector
CZ-600: Resist up to 63 MPa pressure. Its two components can be easily connected injection gun and pump.

Injection valve
ZF-10/12/14: Connect injection gun and clamp. ZF12 (M20/M12) is normally used

Band tightening tool
JT-1: Stretch and cut steel band

Steel band
SD-1: width 30mm, thickness 1-1.2mm and length according to requirement.

Band tightening buckle
SK-1: Steel band can be fixed by tightened buckle.

High pressure hose
HG-1: 3M/5M/10M, 60Mpa, connect injection gun and pump.

Pressure gauge
YP-1: Max pressure 60Mpa.

Pressure gauge connector
ST-1: Connect pressure gauge, pump and fast installing connector.

Bolt injection valve
LF-1: Inject sealant through flange bolthole. Various connectors are provided for M10-M33 bolts.

Equipments and Tools Package
Hydraulic reposition injection tool
Consists of SDB-2 manual hydraulic pump, MG-85-1 Hydraulic reposition injection gun, Pressure gauge connector, 3M hydraulic hose, Installing connector, and shunt valve.

Automatic reposition injection tool
Consists of SDB-2 manual hydraulic pump, MG-92-1 Automatic reposition injection gun, Pressure gauge connector, 3M hydraulic hose, and Installing connector.

Automatic reposition injection tool
Consists of SYB-1 manual hydraulic pump, MG-96-1 Automatic reposition injection gun, Pressure gauge connector, 3M hydraulic hose, and Installing connector.

Note: P392 manual hydraulic pump, DB90.7 electric hydraulic pump or PAT1102N pneumatic hydraulic pump may be used to consist new package per client's requirement.